CETA Testsysteme GmbH offers now leak testers, which are able to detect leak rates down to 10- 6 mbar*l/s. This leak tester allows wide application possibilities not only in the gas-based testing of moldings and components, but especially in the leak test of gas-filled or liquid-filled product packaging and molded components and parts.Advantages:• Broadband measurement of various ingredients• Specific measurement of tracer gases• Pressureless test with high-sensitivity sensor• Test times less than 10 s• Versatile usability through all phases of packaging and process development• Suitable for 100% inline control or as an end-of-line test• Modular design allows cost-effective scalability even for higher throughputs• Lowest operating costsMeasuring method - The measuring method is based on the detection of gases or vapors evaporating from a test part or a packaging in case of a leckage. The test medium escaping from a leak in the test part is accumulated in a closed test chamber (accumulation). The gas volume from the chamber passes the sensor and the resulting signal is measured (injection)Detection limit - Down to 10-6 mbar*l/sDetectable gases - All reducible and oxidizable gases. Typical test gases and vapors: forming gas 95/5 (95% Nitrogen and 5% Hydrogen), alcohols, solvents and other volatile organic gas- and vapor mixtures.Configuration - Sensors for pressure, flow, humidity (optional), running an external test chamber, sensor, heat and valve control, touch screen, USB port
